System Design
Fiber Optic Video & Data Transmitter & Receiver VDO-1010FBT/R can transmission 1-Channel digital composite video and 1 return data, the data support RS485,RS232,RS422 protocols. It is also designed for applications that require control of PTZ cameras.
Stand-alone or rack-mount. All units of VDO-1010FBT/R come in an insert card version. The cards can be inserted into our 14-slot, 19inch 2U or 4U rack-mountable card cage (VDO-CH02 or VDO-CH04).
Single-Mode or Multi-Mode, VDO-1010FBT/R only can support FC /PC Optical connector, can be used in Daisy-Chain system (Need to customize). The Transmission distance range according to the Optical Budget.
Features
Support Point-to-Point or Daisy-Chain connection
Uncompressed Digital Composite Video over one fiber
Compatible with all PAL, NTSC,SECAM Video Systems
Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
Multi-mode Fiber Support for Distances up to 2.0 km
Single-Mode Fiber Support for Distances up to 100 km
LED Status Provide Rapid Indication of Operating Parameters
No EMI or RFI and no ground loops
Support Coarse Wavelength Division Multiplexing (CWDM)
Stand alone or rack-mount
Produce according to customer's specifications, providing OEM
Specifications
| Video | |
| Number of Channels: | 1 Channel Video |
| Video input/output impedance: | BNC 75 Ω |
| Video input/output Compatibility: | PAL, NTSC,SECAM |
| Video input/output voltage: | 1.0 Volt p-p |
| Bandwidth: | 6.5MHZ |
| Bit Resolution: | 8-Bit Digital Transmission |
| Differential Gain: | < 1.5% |
| Differential Phase: | < 1.5 ° |
| Tilt: | < 5% |
| Signal-to-Noise Ratio(SNR): | > 67 dB |
| Data | |
| Data Formats: | RS485(2-wire or 4-wire),RS232,RS422,Contact Closure |
| Data Rate: | DC to 115.2Kbps |
| Bit Error Rate: | 10E-9 |
| Connectors | |
| Video: | 75 Ohm BNC (Gold Center Pin) |
| Data: | 3 Pin Terminal Block |
| Optical: | FC (standard) |
| Stand-Alone Power: | Screw terminal block |
| Rack Power: | AC line cord |
| Electrical & Mechanical | |
| Input Power Requirements: | DC 5V@2A |
| Power Adapter: | AC 100V~240V |
| Power Consumption: | < 3W |
| Stand-Alone Dimensions: | 95mm × 70mm × 25mm |
| Card for 2U Rack Dimensions: | 95mm × 70mm × 25mm |
| Card for 4U Rack Dimensions: | 145mm × 170mm × 20mm |
| Shipping Weight: | 1.2kg (include Transmitter & Receiver) |
| Environmental | |
| Operating Temperature: | -40°C ~ +75°C |
| Storage Temperature: | -40°C ~ +85°C |
| Relative Humidity: | 0% ~ 95% (non-condensing) |
| MTBF: | >100,000 hours |
Ordering Information & Optical Specifications
| Model Number | Fiber Mode | Wavelengths | Optical Power Budget | Maximum Transmission Distance | |
| Transmitter | Receiver | ||||
| VDO-1010FBMT | VDO-1010FBMR | Multi-Mode | 1310/1550nm | 16dB | 2km |
| VDO-1010FBST | VDO-1010FBSR | Single-Mode | 1310/1550nm | 12dB | 20km |
| VDO-1010FBST-4 | VDO-1010FBSR-4 | Single-Mode | 1310/1550nm | 18dB | 40km |
| VDO-1010FBST-6 | VDO-1010FBSR-6 | Single-Mode | 1310/1550nm | 25dB | 60km |
| VDO-1010FBST-8 | VDO-1010FBSR-8 | Single-Mode | 1490/1550nm | 28dB | 80km |
Note:
• The Optical Power Budget data fit Multi-mode(62.5/125 μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables. power adapter included (for standalone) US, European, UK or Australian power plug.• Please feel free to consult factory for any special requirement and customization.