General
F3724 LTE/TD-SCDMA WIFI ROUTER is a kind of cellular terminal device that provides data transfer function by public LTE/TD-SCDMA network.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Product Feature
Design for Industrial Application
- High-powered industrial cellular module
- High-powered industrial 32bits CPU
- Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
- Housing: iron, providing IP30 protection.
- Power range: DC 5~35V
Stability and Reliability
- Support hardware and software WDT
- Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
- Ethernet port: 1.5KV magnetic isolation protection
- Provide management software for remote management
- Support several work modes
- Convenient configuration and maintenance interface（WEB or CLI）
High-performance
- Support 3G/HSPA/4G WAN access methods.
- Support VPN client(PPTP, L2TP, OPENVPN,IPSEC and GRE)(only for VPN version)
- Support VPN server(PPTP, L2TP, OPENVPN,IPSEC and GRE)(only for VPN version)
- Support local and remote firmware upgrade,import and export configure file.
- Support NTP, RTC embedded.
- Support mulitiple DDNS provider service.
- Support MAC Address clone, PPPoE Server
- RS232/RS485/RS422 port: 15KV ESD protection
- SIM/UIM port: 15KV ESD protection
- Power port: reverse-voltage and overvoltage protection
- Antenna port: lightning protection(optional)
Standard and Convenience
- Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
- Support intellectual mode, enter into communication state automatically when powered
- WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge and WDS(optional) mode.
- WIFI support WEP,WPA,WPA2 encryption,Support RADIUS authentication and MAC address filter.
- Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
- Support APN/VPDN
- Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
- Full protocol support , such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, SSHD, etc.
- Schedule Reboot, Schedule Online and Offline,etc.
Product Specification
Cellular Specification
Cellular Module Industrial cellular module
Standard and Band LTE TDD 200/2300MHz
DC-HSPA+/HSPA+/HSUPA/HSDPA/UMTS 2100/900MHz
GSM 850/900/1800/1900MHz
Bandwidth LTE(Download speed:68Mbps, upload speed:17Mbps)
HSUPA:5.76Mbps(upload speed)
HSDPA:14.4Mbps(Download speed)
HSPA+: 28Mbps(Download speed)
TX power <24dBm
RX sensitivity <-106dBm
WIFI Specification
Standard IEEE802.11b/g/n
Bandwidth IEEE802.11b/g: 54Mbps (max)
IEEE802.11n: 150Mbps (max)
Security WEP, WPA, WPA2, etc.
WPS (optional)
TX power 21.5dBm（11g），26dBm（11b）
RX sensitivity <-72dBm@54Mpbs
Hardware System
CPU Industrial 32 bits CPU
FLASH 8MB(Extendable to 64MB)
RAM 64MB
Interface Type
Ethernet 1 10/100 Mbps Ethernet port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
Serial 1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, (space, mark，(optional))
Baud rate: 2400~15200 bps
Indicator "Power", "System", "Online", "Link/ACT", "WIFI", “Signal Strength”
Antenna Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
WIFI: Standard SMA male interface, 50 ohm, lighting protection(optional)protection(optional)
SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection
Power Standard 3-PIN power jack, reverse-voltage and overvoltage protection
Reset Restore the router to its original factory default settings
Power supply
Standard Power DC 12V/1.5A
Power Range DC 5~35V
Consumption <450mA (12V)
Physical Characteristics
Housing Iron, providing IP30 protection
Dimensions 157x97x25 mm
Weight 440g
Environmental Limits
Operating Temperature -35~+75ºC (-13~+149℉)
Storage Temperature -40~+85ºC (-40~+185℉)
Operating Humidity 95% ( unfreezing)
Rất mong được phục vụ quý khách.
Thanks and Best Regards!
_____________________
Nguyen Van Hung
Measurement and Control Equipment Co.,Ltd
847 Huyen Ky, Phu Lam, Ha Dong, Ha Noi, Viet Nam
Mobile: (+84) 904251826
Tel : (+84) 4 85894254
Yahoo: nvhung.mctt
Skype: nvhung.mctt
Email: nvhung@mctt.com.vn
Website: http://www.mctt.com.vn