General
F7234 GPS+CDMA WIFI ROUTER is a kind of cellular terminal device that provides data transfer function by public CDMA network and GPS function.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration. Also, it supports GPS function.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Product Feature
Design for Industrial Application
- High-powered industrial cellular module
- High-powered industrial 32bits CPU
- High-powered industrial GPS module
- Support low-consumption mode , including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode ( optional )
- Housing: iron, providing IP30 protection.
- Power range: DC 5~35V
Stability and Reliability
- Support hardware and software WDT
- Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
- Ethernet port: 1.5KV magnetic isolation protection
- Provide management software for remote management
- Support several work modes
- Convenient configuration and maintenance interface ( WEB or CLI)
High-performance
- Support 3G/HSPA/4G WAN access methods.
- Support GPS function
- Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
- Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
- Support local and remote firmware upgrade,import and export configure file.
- Support NTP, RTC embedded.
- SIM/UIM port: 15KV ESD protection
- Power port: reverse-voltage and overvoltage protection
- Antenna port: lightning protection(optional)
- Ethernet port: 1.5KV magnetic isolation protection
- RS232/RS485/RS422 port: 15KV ESD protection
Standard and Convenience
- Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
- Support standard WAN port and PPPOE protocol that can connect to ADSL directly
- Support intellectual mode, enter into communication state automatically when powered
- WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge and WDS(optional) mode.
- WIFI support WEP,WPA,WPA2 encryption,Support RADIUS authentication and MAC address filter.
- Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
- Support APN/VPDN
- Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
- Full protocol support , such as TCP/IP, UDP, ICMP, SMTP(optional), HTTP, POP3(optional), OICQ(optional), TELNET, FTP(optional), SNMP, SSHD, etc.
- Schedule Reboot, Schedule Online and Offline,etc.
Product Specification
Wireless Specification
Cellular Module Industrial cellular module
Standard and Band CDMA2000 1xRTT 800MHz,
800/1900MHz(optional),450MHz(optional)
Bandwidth 153.6 Kbps
TX power <30dBm
RX sensitivity <-104dBm
GPS Specification
GPS Module Industrial GPS Module
Receiver Type 50 Channels
GPS L1（1575.42MHz）C/A Code
SBAS:WAAS，EGNOS，MSAS，GAGAN
Support: GALILEO
Maximum Update Rate 4 Hz
Accuracy Position: 2.5m CPE
SBAS: 2.0m CPE
Acquisition Cold Start(Autonomous)：29S
Warm Start(Autonomous)：29S
Aided Starts：<1S
Hot Starts(Autonomous)：<1S
Sensitivity Tracking ：-160dBm
Reacquisition：-160dBm
Cold Start(Autonomous)：-144dBm
Timing Accuracy RMS：30ns
99%：<60ns
Granularity：21ns
Time Pulse Configurable 0.25Hz to 1000Hz
WIFI Specification
Standard IEEE802.11b/g /n
Bandwidth IEEE802.11b/g: 54Mbps (max)
IEEE802.11n: 15 0Mbps (max)
Security WEP, WPA, WPA2, etc.
WPS (optional)
TX power 21.5dBm （ 11g ） ， 26dBm （ 11b ）
RX sensitivity <-72dBm@54Mpbs
Hardware System
CPU Industrial 32 bits CPU
FLASH 8MB(Extendable to 64MB)
RAM 64MB
Interface Type
Ethernet 1 10/100 Mbps Ethernet port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
Serial 1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space(optional), mark(optional)
Baud rate: 2400 ~ 115200 bps
Indicator "Power", "System", "Online", "Alarm", " Local Network ", "WAN", "WIFI ", " Signal Strength"
Antenna Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
GPS: Standard SMA female interface, 50 ohm, lighting protection(optional)
SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection
Power Standard 3-PIN power jack, reverse-voltage and overvoltage protection
Reset Restore the router to its original factory default settings
Power supply
Standard Power DC 12V/1.5A
Power Range DC 5~35V
Consumption <650mA (12V)
Physical Characteristics
Housing Iron, providing IP30 protection
Dimensions 206x135x28 mm
Weight 795g
Environmental Limits
Operating Temperature -35~+75ºC (-13~+149℉)
Storage Temperature -40~+85ºC (-40~+185℉)
Operating Humidity 95% ( unfreezing)
Rất mong được phục vụ quý khách.
Thanks and Best Regards!
_____________________
Nguyen Van Hung
Measurement and Control Equipment Co.,Ltd
847 Huyen Ky, Phu Lam, Ha Dong, Ha Noi, Viet Nam
Mobile: (+84) 904251826
Tel : (+84) 4 85894254
Yahoo: nvhung.mctt
Skype: nvhung.mctt
Email: nvhung@mctt.com.vn
Website: http://www.mctt.com.vn