| Features |
Máy hàn cáp quang RY-F600H Fusion Splicer
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGAinterface
Software upgrade via USB interface
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGAinterface
Software upgrade via USB interface
| Specefications |
| Model | RY-F600H with Fiber Holders | |
| Applicable fibers | SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) | |
| Fiber cleaved length | 10 ~16mm (Coating diameter<250µm);16mm(Coating diameter250~1000µm) | |
| Fiber diameter | Cladding diameter:80 ~150µm , Coating diameter:100 ~1000µm | |
| Auto focusing | Available | |
| Fiber aligning method | Core aligning, clad aligning, manual aligning | |
| Average splice loss | 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS) | |
| Splicing time | Typical 9 sec,with standard SM fiber | |
| Heating time | Typical 36 sec | |
| Applicable sleeves | 60mm, 40mm and a series of micro sleeves | |
| Tension test | 2N(option) | |
| Electrode life | 5000 | |
| Battery capacity | Typical 400 cycles (splice and heat) | |
| Monitor | 5.1 inch TFT color monitor | |
| Terminal | USB 1.1 and VGA , software upgrade via USB interface | |
| Operating condition | 0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50oCC, respectively, Max. wind velocity of 15m/s | |
| Splicing mode | Auto ,normal | |
| Fiber cleaved angle threshold set | 0.1 ~ 10.0 oC , 0.1oCstep | |
| Power supply | Li-battery 1
| |
| Dimension | ||
| weight | 2.4kg 2.9kg(battery) |