F10-M (Standard Mifare Card Reader) is a fingerprint reader produced by ZK Software specifically for the Access Control .Its remarkable advantage is that it can match with most of the access controllers on the market ,inland or abroad, It supports Wiegand 26-64 output ,and integrates special access control software which can be upload, download, delete and wiegand products ,all input /output are using anti-jamming protection and over-voltage/circuit protection. The product experiences the strict degradation test before leaving factory ,high stability the main feature.
Support wiegand 26 or user-defined format, match most of door access controller
· External connected with IC/ID reader.Card+ Fingerprint validation mode for currentreader
· Adopt Biokey 2007 latest algorithm and intel32 bits processor
· Option for built in Mifare reader or EM reader , it can deal with 3000 fingerprint templates , no
      matter good or poor quality, within only 1 second.
· Adopt solid, durable, anti-static optical sensor
· user-defined ID No, easy to manage
· Standard RS485 connection, RS 232 or TCP/IP as auxiliary communication port
· Support u are u sensor or F10 for collecting fingerprint template
· Stability protection: reset switch, hardware watchdog, communication setting initialization by
      hardware, anti-over voltage and over current protection.
· Dismantle alarm TTL output
· Convenient DB15 connection
Applicable Wiegand manage software for fingerprint enrollment, download, upload, deletion

Terms		Content
Wiegand input and output		provide a standard wiegand26 or user-defined format to controller, accept the wiegand26 input, that is, a ID card reader could connect toit directly
Capacity of the templates	The version with in-build Mifare module	Infinite capacity
Verification mode	The version with Mifare Card	When 5000/8000 templates, 1：1, support card+ fingerprint
Communication ways	TCP/IP as backup	Default IP address：192.168.1.201
	RS-485	Default baud rate：38400, device number：1, port：COM1
Sensor	Type	Optical
	Resolution	500DPI
Display	Indication	Power indicator，dual-color LED
Identification	Speed	speed＜2 sec
	Technical spec	FAR≤0.0001%, FFR≤1%
Alarm	Dismantle alarm	TTL (transistor-transistor logic) output for alarm
Configuration	Intel32bit processor, 2007 version algorithm
Power	12V DC, currency under idle status＜50mA, wording currency＜400mA
Operation environment	Temperature	0℃-45℃
	Humidity	20%-80%
Software	Management software of fingerprint reader