Technical Specifications
Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 16MB
Antenna
Four (4) Internal 5 dBi Omni-Directional Antennas
Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE capable
1 x Reset Button
1 x Power Connector
Power Requirements
Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations
OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Software
Operation Modes
Access Point, Mesh AP (available soon)
Multiple BSSID
Supports up to 8 BSSIDs per radio
LAN
IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging
Spanning Tree
Supports 802.1d Spanning Tree Protocol
Wireless
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission Rate
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only
QoS
WMM (Wireless Multimedia)
Wireless Management Features (with Neutron Series Switch)
• Access Point Auto Discovery and Provisioning
• Access Point Auto IP Assignment
• Access Point Cluster Management
• Remote Access Point Rebooting
• Access Point Device Name Editing
• Access Point Radio Settings
• Band Steering
• Traffic Shaping
• Fast Handover
• Seamless Roaming (requires RADIUS server)
• Access Point Client Limiting
• Mesh Network*
• Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
• VLANs for Access Point- Multiple SSIDs
• Guest Network
• Access Point Status Monitoring
• Wireless Client Monitoring
• Wireless Traffic & Usage Statistics
• Visual Topology View
• Floor Plan View
• Map View
• Secure Control Messaging
• SSL Certificate
• Local MAC Address Database
• Remote MAC Address Database (RADIUS)
• Unified Configuration Import / Export
• Bulk Firmware Upgrade Capability
• Intelligent Diagnostics
* Mesh networking mode available soon as a free firmware upgrade
Management
Tx Power Control:
Adjust transmit power by dBm
Configuration:
Web-based configuration (http)
Firmware Upgrade:
Via web browser, settings are reserved after upgrade
Administrator Setting:
Administrator Username and Password Change
Reset Setting:
Reboot (press and hold for 2 seconds).
Reset to factory default (press and hold for 10 seconds)
System Monitoring:
Status Statistic and Event Log
SNMP:
V1, V2c, V3
MIB:
MIB I, MIB II (RFC1213) and private MIB
Traffic Shaping:
Incoming and outgoing wireless traffic shaping
Auto-channel Selection:
Automatically selecting least congested channel
Bandwidth Measurement:
IP range and bandwidth management
Auto Reboot:
Reboot Access Point by minute, hour, day, or week
Backup and Restore:
Save and restore settings through Web interface
CLI:
Supports Command Line Interface
Diagnosis:
IP pinging statistics
Log:
SysLog and Local Log support
LED Control:
On/Off
AP Detection:
Scanning for available EnGenius APs
Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 field
L2 Isolation (Access Point mode)
QoS (Quality of Service)
WMM (Wireless Multimedia)
Environmental & Physical
Temperature Range
Operating: 0 to 50ºC (32º to 122ºF)
Operating humidity: 0 to 90º
Storage temperature: -20ºC to 60ºC (-4Fº to 140ºF)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Certifications
FCC, IC
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.
Dimensions & Weights
EWS310AP Device
Weight: 0.80 lbs.
Length: 6.5”
Width: 6.5”
Height: 1.64”
Package Contents
EWS310AP Dual Band N600 Indoor Access Point
12V/2A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
Warranty
1 Year