General
F7514 GPS+TD-SCDMA IP MODEM is a kind of cellular terminal device that provides data transfer and GPS function by public TD-SCDMA network.
It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial devices with only basic configuration. It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automat ion, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Product Feature
Design for Industrial Application
- High-powered industrial cellular module
- High-powered industrial GPS module
- High-powered industrial 32 bits CPU
- Support low power consumption mode, including mult i-sleep and trigger modes to reduce the power dissipation farthest
- Embedded Real Time Clock(RTC) circuit which can realize t iming online/offline function
- Housing: iron, providing IP30 protection
- Power range: DC 5~35V
Stability and Reliability
- Support hardware and software WDT
- TTL logic level RS232 interface can be customized
- Support intellectual mode, enter into communication state automatically when powered
- Provide management software for remote management
- Support several work modes
- Convenient configuration and maintenance interface
High-performance
- Support TCP server and support multi TCP client connection(optional)
- Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
- RS232/RS485/RS422 ports:15KV ESD protection
- SIM/UIM port: 15KV ESD protection
- Power port: reverse-voltage and overvoltage protection
- Antenna port: lightning protection(optional)
Standard and Convenience
- Adopt terminal block interface, convenient for industrial applicat ion
- Support standard RS232/RS485/RS422 ports that can connect to serial devices directly
- Support double data centers, one main and another backup
- Supply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and one pulse input counters.
- Support multi data centers and it can support 5 data centers at the same time
- Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
- Support dynamic domain name(DDNS) and IP access to data center
- Design with standard TCP/IP protocol stack
- Support APN/VPDN
Product Specification
Cellular Specification
Cellular Module Industrial cellular module
Standard and Band TD-SCDMA/HSDPA/HSUPA 1880-1920/2010-2025MHz
GSM850/900/1800/1900MHz
GPRS/EDGE CLASS 12
Bandwidth Download speed:2.8Mbps, upload speed:2.2Mbps
TX power <24dBm
RX sensitivity <-108dBm
GPS Specification
GPS Module Industrial GPS Module
Receiver Type 50 Channels
GPS L1（1575.42MHz）C/A Code
SBAS:WAAS，EGNOS，MSAS，GAGAN
Compatible: GALILEO
Maximum Navigation Update Rate 4 Hz
Horizontal position accuracy Autonomous：2.5m CPE
SBAS：2.0m CPE
Time-To-First -Fix Cold Start(Autonomous)：29S
Warm Start(Autonomous)：29S
Aided Starts：<1S
Hot Starts(Autonomous)：<1S
Sensitivity Tracking & Navigation：-160dBm
Reacquisition：-160dBm
Cold Start(Autonomous)：-144dBm
Timing Accuracy RMS：30ns
99%：<60ns
Granularity：21ns
Time Pulse Frequency Configurable 0.25Hz to 1000Hz
Hardware System
CPU Industrial 32 bits CPU
FLASH 512KB (Extendable)
SRAM 256KB(Extendable)
Interface Type
Serial 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
Indicator "Power", "ACT", "Online", "GPS"
Antenna Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
GPS: Standard SMA female interface, 50 ohm, lighting protection(optional)
SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection
Power Terminal block interface, reverse-voltage and overvoltage protection
Power Input
Standard Power DC 12V/0.5A
Power Range DC 5~35V
Power Consumption
Communication 50-85mA@12VDC；115-160mA@5VDC
Standby 25mA@12VDC；45mA@5VDC
Sleep 8mA@12VDC；18mA@5VDC
Timing Power Off 0.6mA@12VDC；1mA@5VDC
Physical Characteristics
Housing Iron, providing IP30 protection
Dimensions 91x58.5x22 mm
Weight 210g
Environmental Limits
Operating Temperature -25~+65ºC (-13~+149℉)
Extended Operating Temperature -30~+75ºC (-22~+167℉)
Storage Temperature -40~+85ºC (-40~+185℉)
Operating Humidity 95% ( unfreezing)
Rất mong được phục vụ quý khách.
Thanks and Best Regards!
_____________________
Nguyen Van Hung
Measurement and Control Equipment Co.,Ltd
847 Huyen Ky, Phu Lam, Ha Dong, Ha Noi, Viet Nam
Mobile: (+84) 904251826
Tel : (+84) 4 85894254
Yahoo: nvhung.mctt
Skype: nvhung.mctt
Email: nvhung@mctt.com.vn
Website: http://www.mctt.com.vn