Certified Welding Inspector

Mô tả công việc

Group: MSSClearance Level Needed: SecretShift: DayCategory: Engineering & Support ServicesSupervises large scale welding projects and processes. Provides design input and recommends engineering design modifications. Ensures welding jobs meet electromechanical and mechanical specifications and installation instructions. Ensures installations meet specified tolerances. Inspects welding jobs in accordance to specific codes. Trains other welders on proper mechanics and processes. May prepare instructional guides for repairing, calibrating, and maintaining equipment systems.Position Requirements:• 10+ years of experience with 5+ Years Management Certified Welder Experience• Inspectors will be certified IAW one or more of the following: o Certified in accordance with American Welding Society (AWS), Certified Welding Inspector (CWI), qualified and certified in accordance with provisions of AWS QC1, Standard for AWS Certified Welding Inspector; or o Welding inspectors qualified by the Canadian Welding Bureau (CWB) to Level II or the Level III requirements of the Canadian Standards Association Standard W 178.2 Certification of Welding Inspectors; or AWS Certified Associate Welding Inspector under the supervision of a CWI or a CWB Level III; or o A welding inspector certification program that is substantially the same as offered by AWS or CWB. In this case, the inspector certification program must be reviewed and approved by a government CWI or equivalent Quality Assurance representative prior to approval; or o Inspection performed by a Welding Engineer or technician who is competent in the use of weld inspection techniques and equipment, on the basis of formal training, experience, or both, in metals fabrication, inspection, and testing. In this case, the rules that apply for experience as specified for CWI's will apply. • Experienced welder (i.e., MIG, TIG, ARC, etc.) with AWS D1.1 certified. • Have institutional knowledge of electromechanical, mechanical, and pneumatic skills acquired through years of direct military or commercial support to maintain U.S. proprietary low-density systems. • Supervises welding on ballistic hulls and metals, read blueprints and associated installation instructions, and inspect assembly within specified tolerances. • Proficient in flux-cored arc welding (FCAW) and shielded metal arc welding (SMAW) processes. • Provides design details and recommends modifications to engineering designs as needed. • Prepare instructional guides for repairing, calibrating, and maintaining equipment and systems. • Writes and prepares specific weld repair processes and prepare reports based on criteria. • Inspects welds in accordance with AWS D.1.1 specific codes. • Trains in accordance with AWS D.1.1 specific codes. Security Requirements: Secret Security Clearance **Applicants selected will be subject to a government security investigation and must meet eligibility